login.php?sid=4f81e4300b6bc54b7eb014f5cfc17757 profile.php?mode=register&sid=4f81e4300b6bc54b7eb014f5cfc17757 faq.php?sid=4f81e4300b6bc54b7eb014f5cfc17757 memberlist.php?sid=4f81e4300b6bc54b7eb014f5cfc17757 search.php?sid=4f81e4300b6bc54b7eb014f5cfc17757 index.php?sid=4f81e4300b6bc54b7eb014f5cfc17757 Timeslip Database

FastGM.com Forum Index » Tech Questions » front shock install questions
Post new topic  Reply to topic View previous topic :: View next topic 
front shock install questions
PostPosted: Wed May 11, 2011 12:55 am Reply with quote
97isuzu_4x4
GM fanatic
Joined: 10 Sep 2006
Posts: 2200
Location: Goose Creek, SC




well i had a few days off in between spring and summer semester...so i decided to go ahead and install a few things ive been collecting:
-LCA Relocation Brackets (bolt in)
-Adjustable poly/roto panhard bar
-TA Differential Cover
-Hawks HPS pads
-autozone replacement rotors
-Bilstein HDs

everything in the rear went in without a flaw...no hiccup...no problems with rust...the front however...i finally got the stock shocks out of the car...and got the springs off the shocks...i swapped perches onto the hds...and now im in the process of putting them back in the car...and im really tired and have some questions

obviously there is a certain way they must go in in order for the lower shock mount and upper shock mount/upper a arm to bolt in correctly...how close do these have to be or will i be able to spin the shock into place

...also...is there a certain amount of thread that needs to be showing out of the top of the shock mount in order for everything to be installed correctly...

once i get those in...i get to make a run to autozone tomorrow to replace the front sway bar end links that both snapped on me....:

_________________
1994 Formula Firebird
LT1/4L60E/3.42s
Pacesetter Long Tubes & Offroad Y-Pipe, SLP Loud Mouth 1 Catback, K&N Cold Air Intake, CRT Ceramic Intake Elbow, Throttle Body Coolant Bypass, Hypertech 160* Thermostat, NGK TR5 Spark Plugs, MSD 8.5mm Spark Plug Wires, LT4 Knock Module, Herron Performance Tune, !AIR, !EGR, LS1 Brakes,
Rate My Rides http://www.cardomain.com/id/JEB_3096
tcchubb wrote:

you are forgetting i drive a slobra. lol
View user's profile Send private message AIM Address
PostPosted: Wed May 11, 2011 8:39 am Reply with quote
02ws6NBM
GM fanatic
Joined: 07 Oct 2008
Posts: 400
Location: Atlanta, GA




not real clear on your question, but you have to put the a-arm/perch/shock assmebly back into the wheel well in the correct position or same position that it will be bolted back into the car. If you still have the spindle and brakes attached to the suspension, you won't have enough room to rotate the a-arm/perch/shock assembly if you go back into the wheel well area with the assembly in the wrong position. This is from memory, but I didn't have a problem getting the assmebly back into the wheel well in the correct position, so just do it that way and you wont have to rotate it.

check the ls1howto.com website. They have some good detailed instructions to follow.

_________________
some shiny stuff, a little of this, a little of that
View user's profile Send private message
front shock install questions
FastGM.com Forum Index » Tech Questions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum
All times are GMT - 5 Hours  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  


Powered by phpBB © 2001-2004 phpBB Group

Totally optional donation link to help pay for the hosting costs, via paypal:

This site is in no way, shape or form a representation of GM, GMC, Chevrolet, Pontiac, Buick, Cadillac, or any other GM division. This site is privately owned and operated for the enjoyment and support of its members. All Trademarks are the property of their respective owners which are not affiliated with, do not sponsor or endorse, and are not responsible for the content of this web site.